Skip to content

New and pre-owned medical equipment in one catalogue

New

Sino MDT SN-1500H infusion pump

Volumetric infusion pump with solution warming; flow rate 0.1-1500 ml/h, ultrasonic air bubble detector, over 6 hours of battery operation.

Price on request

Add this device to your quote list to request its price.

ТОО "FSA KZ (ФСА КЗ)", Almaty, Kazakhstan, BIN 210940036794

Model
SN-1500H
Category
Infusion pumps

Description

Advantages of the Sino MDT SN-1500H infusion pump

  • Built-in solution warming for patient comfort and to enhance the effect of certain drugs
  • High-accuracy microdosing of solutions based on patient weight
  • The volumetric infusion pump operates reliably and stably, allowing long-term controlled infusion of large volumes of solution
  • Simple interface and convenient settings for immediate adjustment of delivery parameters in response to changes in the animal's condition
  • Dual-processor monitoring for full control and safety of the infusion
  • Wide range of audible and visual alarms for quick notification of critical events

The pump is suitable for dosed administration of large fluid volumes to patients and during animal studies in veterinary clinics.

Sino MDT SN-1500H technical specifications

Flow rate
0.1-1500 ml/h (step 0.1 ml/h; above 100 ml/h, step 1 ml/h)
Bolus rate
600-1000 ml/h (adjustable)
Keep vein open (KVO) flow
0.1-5 ml/h (adjustable)
Occlusion pressure levels
H: 900 ± 200 mmHg (120.7 ± 26.7 kPa); C: 500 ± 100 mmHg (66.7 ± 13.3 kPa); L: 100 ± 50 mmHg (13.3 ± 6.6 kPa)
Infusion accuracy
no more than ±5% (no more than ±3% with calibrated infusion sets)
Air bubble detector
ultrasonic detection method, sensitivity 25 µl
Number of infusion records
1500
Preset volume
1-9999 ml
Delivered volume display range
0.1-9999 ml (step 0.1 ml; above 100 ml, step 1 ml)
Alarms
occlusion; air bubble; end of infusion; door open; low battery; battery depleted; power failure; not calibrated; system error; standby; KVO mode completed; drop sensor failure
Power supply
AC 110-230 V, 50-60 Hz
Internal battery
DC 12 V, 2300 mAh; on a full charge, more than 6 hours of operation at 25 ml/h (including low battery time); higher capacity batteries can be used
External power supply
DC 12 V
Operating conditions
ambient temperature 5 to 40 °C, relative humidity 20% to 90%, ambient pressure 86-106 kPa
Storage conditions
ambient temperature -20 to +55 °C, relative humidity no more than 95%
Electric shock protection
class 1, internal power supply; type CF; continuous operation mode
Water resistance
IPX4
Infusion modes
flow mode; drip mode; weight mode and time mode; two groups of infusion programs can be set in flow and drip modes
Infusion rate
3 modes: drops/min; ml/h; time/volume
Weight
2.5 kg (with mounting base)
Dimensions
308 mm (width) × 140 mm (height) × 144 mm (length)
Infusion sets
stores the settings of sets from 9 brands; infusion accuracy reaches ±3% after calibration
Possible applications
in addition to the pressure control performed by the pump, the flow rate and volume of fluid (drugs, nutrition) delivered to the patient can be controlled
Contraindication
not intended for blood transfusion

Similar devices

Whole category